4-15 Monitoring Configuration Select "Monitoring Configuration" on the Advanced menu to display the following screen.
Option ROM Scan Monitoring:
Option ROM Monitoring
Boot Monitoring:
Boot Monitoring Time-out Period:
POST Pause Monitoring:
POST Pause Monitoring Time-out:
Option ROM Scan
Monitoring features
Item Specific HelpMonitoring Configuration
[Disabled]
[5]
[Enabled]
[8]
[Enabled]
[3]
Phoenix BIOS Setup Utility
Advanced
F1 -/+ Change F9 Setup
F10 Save Changes & ExitSub-MenuEnter Select
Esc Exit Select Item
Select Menu
Displayed only when "Enabled" is selected for "Option ROM Scan
Monitoring", "Boot Monitoring" or "POST Pause Monitoring".
See the table below for setup options on the screen.
Option Parameter Description Your Setting
Option ROM
Scan Monitoring Disabled
[Enabled] Enable or disable the Option ROM scan monitoring
feature.
Option ROM
Monitoring
Time-out
1 - [5] - 20 Specify the Option ROM monitoring time-out
period. This option is displayed only when
"Enabled" is selected for "Option ROM Scan
Monitoring".
Boot Monitoring Disabled
[Enabled] Enable or disable the boot monitoring feature. This
function is unique to the NEC Express5800/ft
series: detects errors until the OS boots up, and
immediately reboots the OS upon detection of an
error. (For details, see “Behavior at Occurrence of
Error” in Chapter 2.) Enable this function if NEC
ESMPRO Agent is installed on the OS. Disable this
function if NEC ESMPRO Agent is not installed or
when you install the OS. Otherwise, the OS will
boot up after “Specified boot timeout.”
Boot Monitoring
Time-out Period 1 - [10] - 20 Specify the boot monitoring time-out period. This
option is displayed only when "Enabled" is selected
for "Boot Monitoring". If you specify a shorter period
of time to “Boot Monitoring Time-out Period”, the
time until rebooting can be reduced. When there is
no external device connected, it is possible to set a
shorter period of time, but 3 minutes or longer is
recommended. Appropriate value for the setting
varies depending on your environment. Therefore,
when changing this setting, evaluate it thoroughly
after constructing the environment.
POST Pause
Monitoring Disabled
[Enabled] Enable or disable the POST monitoring feature
during boot-up restriction.