5-22
Mirror Information of the SCSI Disk
The “Mirror disk” displayed on the [Ft Server] tree of the Data Viewer is always in gray. Also,
“Unknown” is always displayed on the “Status” field.
Stopping the PCI Module by the ft server utility
When you stop the PCI module on the primary side by the ft server utility, the ft server utility screen
may become blur temporarily. However, it returns to a normal status after a few seconds when the
pop-up screen is displayed on the ft server utility. This will not cause a problem for the ft server
utility functions.
About the display of a floppy disk drive
- The information on [drive /dev/fd0] is displayed on a data viewer under [ESMMIB]-[I/O device].
Because the floppy disk drive is not mounted in this equipment, this information should be
ignored.
- When a USB floppy disk drive is connected, the information on a floppy disk drive is not
displayed on a data viewer.