4-5
Configuration Examples
The following describes examples of configuration required to use software-link features or for
system operations.

Link with Management Software

To use the management PC with "NEC MWA" installed for remote operations
Remote operation via LAN
Select [Advanced] [Advanced] [RomPilot Support] [Enabled].
Remote operation via direct connection using cross cable
Select [System Hardware] [Console Redirection] [Console Connection] [Direct].
Remote operation via WAN
Select [System Hardware] [Console Redirection] [Console Connection] [Via
Modem].

UPS

To link power supply with the UPS
To power on the server when power is supplied from the UPS
Select [System Hardware] [AC-LINK] [Power On].
To keep the server off-powered even when power is supplied from the UPS if the POWER
switch was used to power off
Select [System Hardware] [AC-LINK] [Last State].
To keep the server off-powered even when power is supplied from the UPS
Select [System Hardware] [AC-LINK] [StayOff].

Keyboard

To set NumLock and key repeat
Select [Advanced] [Keyboard Features] and set each item.