8-7
Installing 3.5-inch Hard Disk Drive Follow the procedure below to install the hard disk. A hard disk may be installed in another slot in
the same procedure.
IMPORTANT:
Make sure to read "Anti-static Measures" and "Preparing Your System for Upgrade" before
starting installing or removing options.
Install two hard disks for dual disk configuration before starting the OS. Make sure to
configure the hard disks as dual disk.
168. <Tower model>
Unlock the front bezel with the security key and open it.
<Rack-mount model >
Unlock the front bezel with the security key and remove the upper and lower panels.
169. Perform the shutdown process from the OS properly.
Execute the shutdown process using shutdown command, and then press the POWER
switch to turn off the server.
170. Disconnect all the power cords from the power outlet.
171. Identify the slot to which you want to install the hard disk.
Install a hard disk in an empty slot in the group, starting from the left slot.
172. Press the lever of a dummy tray to unlock
the handle. Then bring out the handle and
remove the tray by pulling the handle.
All the slots except Slot 1 have a dummy
tray.
IMPORTANT: Carefully keep the
removed dummy tray.
173. Unlock the hard disk to be added.