NEC 5800/320Lb-R 46. , 47. , 48. , CHECK:, TIPS:

4-44
46. Mount the PCI Module #1 again to the NEC Express5800/ft series (see page 8-33
“Installing PCI Module”) and plug the power cord to the AC inlet B (for Group1). (The
POWER Switch LED will be turned on.)
47. Likewise, mount the PCI Module #2 to the NEC Express5800/ft series and plug the power
cord to the AC inlet A (for Group2).
48. Shortly after you connect the both power cords, the BMC status LED on PCI Module #2
will start to blink.
When Password clear is completed, the BMC status LED will go off.
CHECK:
The BMC status LED blinks to show that synchronous processing is being
performed between the two modules. When this process is complete, Password has
also been cleared on PCI Module #2.
TIPS:
 For the location of the AC inlet A, the AC inlet B, see “Names and Functions of
Components” in Chapter 2.
 For the location of the BMC status LED, see “Names and Functions of
Components” in Chapter 2.
 For description of the BMC status LED, see “LEDs” in Chapter 2.