Lower Feeder Unit (LFU) 135

7Check the front and rear positions
of the positioning pins on the
LFU(s), and make sure the metal
coupler is in the open position.
8For dual LFU installations:
After verifying that both
metal couplers are in the
open position, align the
positioning pins and set one
LFU on top of the other.
9Set the printer on top of
the LFU(s) .
Be sure to align the printer and
LFU(s) as precisely as possi-
ble. Make sure the printer is not
tilted on top of the LFU(s).

Positioning pins

Metal coupler (open position)