Loading Media46

4Load the media face-up with its top
toward the right of the tray and the
long edge toward the printer.
A fill limit mark is provided on the
inside left side of the tray. The stan-
dard upper media tray holds 250
sheets of 20 lb bond (75 g/m²)
paper. The optional lower feeder unit
media tray holds 500 sheets of 20 lb
bond (75 g/m²) paper.
Often, an arrow on the media pack-
age label indicates the printing-side
of the media.
Attention
If necessary, readjust the media guides after inserting the media.
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
5Slide the media tray back into the printer.

Loading and Printing Letterhead and Memo Media

1In the printer driver (Paper tab, Paper Type option), select Automatic.
2Remove the media tray from the printer (and remove any media in
the tray).
3Load the new
media.
If you are using
the universal tray
and are printing
simplex
(one-side per
sheet) (long-
edge first), l
oad the media
printing-side up
with the top of the media (the letterhead or memo information) on the right
side of the tray. If you’re using the optional letter/A4 tray and are printing
simplex short-edge first, load the media printing-side up with the top of the
media (the letterhead or memo information) toward the back of the tray.
4Slide the media tray back into the printer.
Universal tray Letter
/
A4 tray