Cleaning the Printer 59

bUsing a dry cotton cloth, clean
any paper dust and toner
buildup from the transfer roller.
Manually rotate the roller while
cleaning it.
cReinstall the transfer roller in
the transfer unit.
4Clean the paper discharger.
aRemove the paper discharger
by pushing it to the right and
then lifting it up and out of the
transfer unit. (It comes out
after the tabs on the charger
have cleared their retainers.)
bUsing a dry cotton cloth, clean
any paper dust and toner
buildup from the outside of the
paper discharger.
cUsing a dry cotton swab, clean
any paper dust and toner
buildup from the interior of the
paper discharger.
dUsing a dry cotton swab, clean
the paper discharger wire.
eReinstall the paper discharger
in the transfer unit, and then
push it down and to the left to
lock it in place.
6Clean any paper dust and toner buildup found on the transfer unit itself.
7Close the printer’s rear cover.
5"
If you have a duplex unit installed, close the duplex unit’s rear
cover and paper guide.
8Plug in the printer, and turn it on.
5"
In compliance with UL guidelines, “The appliance inlet is consid-
ered to be the main disconnect device.”
Wire inside