Media40

Labels

Input Tray Upper media tray only
Capacity Up to 50 sheets, depending on the thickness of
the labels
Orientation Face up
Type Use only labels recommended for laser printers, such as
Avery 5260
Weight 24–42 lb (90–157 g/m²)
Print Mode
to Select Thick stock
Duplexing Not supported
Notes Avoid using labels with exposed adhesive; it may stick to
internal printer parts, causing labels to peel off and media
jams to occur.
Adhesive label stock is supported only in letter or A4
sheets.
A label consists of a face sheet (the printing surface),
adhesive, and a carrier sheet
The adhesive and carrier sheet must withstand the fus-
ing temperature (392° F/200° C).
The face sheet must follow the plain paper specifica-
tions on “Media Storage and Handling” on page 30.
The face sheet surface must cover the entire carrier
sheet, and no adhesive should come through on the
surface.
You can print continuously with label paper. However, this
could affect the media feed, depending on the media qual-
ity and printing environment. If problems occur, stop the
continuous print and print one sheet at a time.