Repack the Printer 177
4Weave the slack of
one end through
the buckle.
5Pull the slack on
that end so that the
strapping is taut in
the buckle.
6Weave the slack of
the other end through the buckle.
7Pull all of the
remaining slack
of the strapping
through this side
of the buckle,
until the buckle is
taut against the printer box.
8Pull the buckle against the printer as tightly as possible.
Some slack may still exist.
9Repeat this procedure
three more times, spacing
the straps equidistant
across the box.
10 Write the RMA number
prominently
on the carton.
RMA #