Clearing Media Jams 75
WARNING!
If you get toner in your eyes, wash it out immediately with cool water
and consult a doctor. Material Safety Data Sheets (MSDS) information
can be found at www.minolta-qms.com (click on the Answer Base).
ACHTUNG! Sollte Toner in Ihre Augen gelangen, die Augen unbedingt
sofort mit kaltem Wasser ausspülen und einen Artzt aufsuchen.
MSDS-Informationen (Material Safety Data Sheets; Datenblätter ur
Materialsicherheit) finden Sie im Internet unter www.minolta-qms.com
(klicken Sie auf “Answer Base”).
If, after clearing the media jam, the jam message in the control panel window
persists, open and close the printer’s covers. This should clear the jam
message.
Handling Media Jams by Location
Misfeed Jams
1Remove the media tray(s).
2Pull out the jammed media.
3Shuffle the media currently in the tray(s) and even up the front edges.
4Ensure that the media is lying flat in the tray(s).
5Reinsert the media printing face up.
Attention
Make sure the media doesn’t exceed the media limit mark. Check to
see if the media width guides are correct.
6Slide the tray(s) back into the printer.
7Open the front cover, then close it.
The media jam display is cancelled.
Location of Jam Page Reference
Tray 1—upper tray
Tray 2 or 3—optional tray(s) (lower feeder unit) page 75
Near OPC belt page 76
Near duplex unit page 79
Near fuser unit page 76