Loading Media 45

2If you need to open
the transparent
dust cover to load
oversize media,
replace it before
sliding the media
tray back into the
printer.
3Adjust the media
guides to fit the
size paper you’re
loading.
Squeeze the retainers at the ends of the left guide and the center guide,
carefully move the guide to the appropriate location (media sizes are
listed on the tray), and release the retainers.
Setting the guides
for the wrong size
media may affect
print quality.
The media pressure
plate will automati-
cally lock into position
when the media is
loaded.
Attention
The paper should fit easily between the guides. Make sure the paper
corners are not bent. Improperly adjusted guides may cause poor
print quality, media jams, or printer damage. Do not overfill the tray.

Left guide

Center guide

Media pressure plate