Lower Feeder Unit (LFU)134
1Remove the fuser oil bottle.
Attention
Hold a sheet of paper under
the oil bottle as you remove
it, so no oil drips into the
printer.
2Turn the nozzle on the opening on the bottom
clockwise to close it. Place the oil bottle (nozzle
up) in an oil-proof container such as a plastic bag,
until you’re ready to reinstall it.
3Use the fuser oil remover syringe that came with
your printer or an eye-dropper to remove any
excess oil from the printer.
5"
Dispose of the oil in accordance with local safety laws and
regulations.
4Remove the LFU from the shipping carton, and place it on a table or flat
surface near the printer.
5Remove any tape and packing material from the LFU.
5"
We strongly suggest that you save the packaging materials in
case you ever need to move or ship the printer.
6Position the LFU cable
connector away from the
rear of the LFU.
Nozzle