Prepare the Fuser Unit168

2Remove the oil
bottle.
Attention
Hold a sheet of paper
under the oil bottle as you
remove it, so no oil drips
into the printer.
3Turn the nozzle on the opening on the bottom clock-
wise to close it. Place the oil bottle (nozzle up) in an
oil-proof container, such as a plastic bag, until
you’re ready to reinstall it.
4Use the fuser oil remover syringe that came with
your printer or an eye-dropper to remove any excess oil from the printer.
5"
Dispose of the oil in accordance with local safety laws and
regulations.
5Stuff several clean, wad-
ded paper towels into the
space normally occupied
by the oil bottle to absorb
any residual oil during
shipment.
5"
Don’t force the
paper towels in,
but make sure
there are enough
to fill the space.
6At the top of the
fuser, rotate the
two lock levers to
release the
cleaning roller.

Nozzle

Lock levers

Front of printer