Monitor System Access and Performance
357
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Figure 214.

The type of connection determines the information that is displayed on the Connection Status screen. The screen can display the information that is described in the following table:Click Disconnect to disconnect the connection.

Table 88. Connection Status screen information for an IPv4 connection

Item Description
Connection Time The period that the wireless VPN firewall has been connected through the WAN port.
Connection Type The connection type can be either DHCP or Static IP.
Connection Status The connection status can be either Connected or Disconnected.
IP Address The addresses that were automatically detected or that you configured on the
Broadband ISP Settings (IPv4) screen.
Note: For more information, see Let the Wireless VPN Firewall Automatically Detect
and Configure an IPv4 Internet Connection on page 28 and Manually Configure an
IPv4 Internet Connection on page 31.
Subnet Mask
Gateway
DNS Server
DHCP Server DHCP only. The DHCP server that was automatically detected. This field displays
only if your ISP does not require a login and the IP address is acquired dynamically
from your ISP. You have configured these ISP settings on the Broadband ISP
Settings screen.
Note: For more information, see Let the Wireless VPN Firewall Automatically Detect
and Configure an IPv4 Internet Connection on page 28 and Manually Configure an
IPv4 Internet Connection on page 31.
Lease Obtained DHCP only. The time when the DHCP lease was obtained.
Lease Duration DHCP only. The period that the DHCP lease remains in effect.