NETGEAR SRX5308-100NAS IPv6 LAN WAN Outbound Rules

Firewall Protection
144
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Unless your selection f rom the Action drop-down list is BLOCK always, you also need to
make selectio n s f r o m t he following drop-down lists:
•Select Schedule
•QoS Profile
•Bandwidth Profile
•NAT IP (This drop-down list is available only when the WAN mode is NAT.)
3. Click Apply to save your changes. The new rule is now added to the Outbound Services
table.
IPv6 LAN WAN Outbound Rules
To create a new IPv6 LAN WAN outbound rule:
1. In the upper right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see Figure 73 on page 142).
2. Click the Add table button under the Outbound Services table. The Add LAN WAN
Outbound Service screen for IPv6 displays:
Figure 75.
3. Enter the settings as explained in Table 32 on page 133. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
•LAN Users
•WAN Users
Unless your selection f rom the Action drop-down list is BLOCK always, you also need to
make a selecti on from the following drop-down lists:
•Select Schedule
•QoS Priority
4. Click Apply to save your changes. The new rule is now added to the Outbound Services
table.