Virtual Private Networking Using IPSec and L2TP Connections
213
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
c. Specify the settings that are explained in the following table.8. Configure the global parameters:a. Click Global Parameters in the left column of the Configuration Panel screen. The Global Parameters pane displays in the Configuration Panel screen:

Table 47. VPN client advanced authentication settings

Setting Description
Advanced features
Aggressive Mode Select this check box to enable aggressive mode as the mode of negotiation
with the VPN firewall.
NAT-T Select Automatic from the drop-down list to enable the VPN client and VPN
firewall to negotiate NAT-T.
Local and Remote ID
Local ID As the type of ID, select DNS from the Local ID drop-down list because you
specified FQDN in the VPN firewall configuration.
As the value of the ID, enter remote.com as the local ID for the VPN client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client. It
might be less confusing to configure an FQDN such as client.com as the
remote ID on the VPN firewall and then enter client.com as the local ID on
the VPN client.
Remote ID As the type of ID, select DNS from the Remote ID drop-down list because
you specified an FQDN in the VPN firewall configuration.
As the value of the ID, enter local.com as the remote ID for the VPN firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client. It
might be less confusing to configure an FQDN such as router.com as the
local ID on the VPN firewall and then enter router.com as the remote ID on
the VPN client.