Manage Users, Authentication, and VPN Certificates
309
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 205.
5. In the Defined Addresses Status section of the screen, select one of the following radio
buttons:
•Deny Login from Defined Addresses. Deny logging in from the IP addresses in the
Defined Addresses table.
•Allow Login only from Defined Addresses. Allow logging in from the IP addresses
in the Defined Addresses table.
6. Click Apply to save your settings.
7. In the Add Defined Addresses section of the screen, add an address to the Defined
Addresses table by entering the settings as explained in the following table:
8. Click the Add table button. The address is added to the Defined Addresses table.
9. Repeat Step 7 and Step 8 for any other addresses that you want to add to the Defined
Addresses table.
Table 79. Defined addresses settings for IPv6
Setting Description
Source Address Type Select the type of address from the drop-down l ist:
• IP Address. A single IPv6 address.
• IP Network. A subnet of IPv6 addresses. You need to enter a prefix length in the
Prefix Length field.
Network Address / IP
Address Depending on your selection from the Source Address Type drop-down list, enter
the IP address or the network address.
Prefix Length For a network address, enter the prefix length (0–64).
Note: By default, a single IPv6 address is assigned a prefix length of 64.