IPv4 and IPv6 Internet and WAN Settings
78
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
To edit a QoS profile:
1. In the List of QoS Profiles table, click the Edit table button to the right of the profile that
you want to edit. The Edit QoS screen displays. This screen shows the same fields as the
Add QoS screen (see the previous two figures).
2. Modify the settings as explained in the previous two tables.
3. Click Apply to save your settings.
To delete a QoS profile:
1. In the List of QoS Profiles table, select the check box to the left of the QoS profile that
you want to delete, or click the Select All table button to select all profiles.
2. Click the Delete table button.
Additional WAN-Related Configuration Tasks
If you want the ability to manage the VPN firewall remotely, enable remote management (see
Configure Remote Management Access on page 330). If you enable remote management,
NETGEAR strongly recommends that you change your password (see Change Passwords
and Administrator and Guest Settings on page 328).
As an option, you can also set up the traffic meter for each WAN interface (see Configure and
Enable the WAN Traffic Meter on page 347).

Verify the Connection

Test the VPN firewall before deploying it in a live production environment. Verify that network
traffic can pass through the VPN firewall:
•Ping an Internet URL.
•Ping the IP address of a device on either side of the VPN firewall.
What to Do Next
You have completed setting up the WAN connection for the VPN firewall. The following
chapters and sections describe important tasks that you need to address before you deploy
the VPN firewall in your network:
•Chapter 3, LAN Configuration
•Configure Authentication Domains, Groups, and Users on page 296
•Manage Digital Certificates for VPN Connections on page 313
•Use the IPSec VPN Wizard for Client and Gateway Configurations on page 198
•Chapter 6, Virtual Private Networking Using SSL Connections