Virtual Private Networking Using SSL Connections
287
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
.
Figure 189. Add SSL VPN Policy screen for IPv6
4. Complete the settings as explained in the following table:
Table 73. Add SSL VPN Policy screen settings
Setting Description
Policy For
Select one of the following radio buttons to specify the type of SSL VPN policy:
• Global. The new policy is global and includes all groups and users.
• Group. The new policy needs to be limited to a single group. From the drop-down list, select a group
name. For information about how to create groups, see Configure Groups on page 300.
• User. The new policy needs to be limited to a single user. From the drop-down list, select a user name.
For information about how to create user accounts, see Configure User Accounts on page 303.
Add SSL VPN Policies
Apply
Policy to? Select one of the following radio buttons to specify how the policy is applied. When you select
a radio button, the fields and drop-down lists that apply to your selection (see explanations
later in this table) unmask onscreen.
• Network Resource. The policy is applied to a network resource that you have defined on
the Resources screen (see Use Network Resource Objects to Simplify Policies on
page 281).
• IP Address. The policy is applied to a single IP address.
• IP Network. The policy is applied to a network address.
• All Addresses. The policy is applied to all addresses.
Network
Resource Policy Name A descriptive name of the SSL VPN policy for identification and
management purposes.
Defined
Resources From the drop-down list, select a network resource that you
have defined on the Resources screen (see Use Network
Resource Objects to Simplify Policies on page 281).
Permission From the drop-down list, select Permit or Deny to specify
whether the policy permits or denies access.