Firewall Protection
150
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv4 DMZ WAN Outbound Service Rules
To create a new IPv4 DMZ WAN outbound rule:
1. In the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by
default. The screen displays the IPv4 settings (see Figure 78 on page 148).
Click the Add table button under the Outbound Services table. The Add DMZ WAN
Outbound Service screen for IPv4 displays:
Figure 80.
2. Enter the settings as explained in Table 32 on page 133. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
•DMZ Users
•WAN Users
Unless your selection f rom the Action drop-down list is BLOCK always, you also need to
make selectio n s f r o m t he following drop-down lists:
•Select Schedule
•NAT IP (This drop-down list is available only when the WAN mode is NAT.)
The following configuration is optional:
•QoS Profile
3. Click Apply. The new rule is now added to the Outbound Services table. The rule is
automatically enabled.