NETGEAR SRX5308-100NAS Figure 45. , Table 13. Add QoS screen settings for a rate control profile

IPv4 and IPv6 Internet and WAN Settings
74
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 45.
3. Enter the settings as explained in the following table:
Table 13. Add QoS screen settings for a rate control profile
Setting Description
QoS Type Rate Control (for Priority, see Figure 46 on page 76 and Table 14 on page 76).
Interface From the drop-down list, select one of the WAN interfaces.
Service From the drop-down list, select a service or application to be covered by this
profile. If the service or application does not appear in the list, you need to
define it using the Services screen (see Add Customized Services on
page 172).
Direction From the drop-down list, select the direction to which rate control is applied:
• Inbound Traffic. Rate control is applied to inbound traffic only.
• Outbound Traffic. Rate control is applied to outbound traffic only.
• Both. Rate control is applied to both outbound and inbound traffic.
Diffserv QoS Match Enter a DSCP value in the range of 0 through 63. Packets are classified against
this value. Leave this field blank to disable packet matching.