NETGEAR SRX5308-100NAS View the Active L2TP Users

Virtual Private Networking Using IPSec and L2TP Connections
266
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 177.
2. Enter the settings as explained in the following table:
3. Click Apply to save your settings.
View the Active L2TP Users
To view the active L2TP tunnel users, select VPN > Connection Status > L2TP Active
Users. The L2TP Active Users screen displays. (The following figure does not show any
active users.)
Figure 178.
Table 67. L2TP Server screen settings
Setting Description
Enable To enable the L2TP server, select the Enable check box.
Starting IP Address The first IP address of the pool. This address is used for distribution to the VPN
firewall.
Ending IP Address The last IP address of the pool. A maximum of 26 contiguous addresses is
supported. (The first address of the pool cannot be assigned to a user.)
Idle Timeout The period after which an idle user is automatically logged out of the L2TP server.
The default idle time-out period is 5 minutes.