Virtual Private Networking Using SSL Connections
279
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 184. SSL VPN Client screen for IPv6
3. Complete the settings as explained in the following table:
Table 71. SSL VPN Client screen settings for IPv4 and IPv6
Setting Description
Client IP Address Range
Enable Full Tunnel Support Select this check box to enable full-tunnel support. If you leave this check box
cleared (which is the default setting), full-tunnel support is disabled but
split-tunnel support is enabled, and you need to add client routes (see Add
Routes for VPN Tunnel Clients on page 280).
Note: When full-tunnel support is enabled, client routes are not operable.
IPv4 screen only
DNS Suffix A DNS suffix to be appended to incomplete DNS search
strings. This setting is optional.
Primary DNS
Server The IP address of the primary DNS server that is assigned
to the VPN tunnel clients. This setting is optional.
Note: If you do not assign a DNS server, the DNS settings
remain unchanged in the SSL VPN client after a VPN
tunnel has been established.
Secondary DNS
Server The IP address of the secondary DNS server that is
assigned to the VPN tunnel clients. This setting is optional.
Client Address
Range Begin The first IP address of the IPv4 address range that you
want to assign to the VPN tunnel clients. By default, the
first IPv4 address is 192.168.251.1.