NETGEAR SRX5308-100NAS IPv4 DMZ WAN Inbound Service Rules

Firewall Protection
152
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
IPv4 DMZ WAN Inbound Service Rules
To create a new IPv4 DMZ WAN inbound rule:
1. In the upper right of the DMZ WAN Rules screen, the IPv4 radio button is selected by
default. The screen displays the IPv4 settings (see Figure 78 on page 148).
Click the Add table button under the Inbound Services table. The Add DMZ WAN
Inbound Service screen for IPv4 displays:
Figure 82.
2. Enter the settings as explained in Table 33 on page 137. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
•WAN Destination IP Address
•DMZ Users (This drop-down list is available only when the WAN mode is Classical
Routing. When the WAN mode is NAT, your network presents only one IP address to
the Internet.)
•WAN Users
Unless your selection f rom the Action drop-down list is BLOCK always, you also need to
make selectio n s f r o m t he following drop-down lists:
•Select Schedule
•Send to DMZ Server
The following configurations are optional:
•Translate to Port Number
•QoS Profile
3. Click Apply to save your changes. The new rule is now added to the Inbound Services
table.