Network and System Management
335
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
To configure the SNMP settings:
1. Select Administration > SNMP. The SNMP screen displays. (The following figure
contains an example.)
Figure 217.
The SNMPv3 Users table includes the default SNMPv3 users that are preconfigured on
the VPN firewall. The SNMPv3 Users table shows the following columns:
•Username. The default user names (admin or guest).
•Access Type. Read-write user (RWUSER) or read-only user (ROUSER). By default,
the user Admin is an RWUSER and the user guest is an ROUSER.
•Security Level. The level of security that indicates whether security is disabled:
-NoAuthNoPriv. Both authentication and privacy are disabled.
-AuthNoPriv. Authentication is enabled but privacy is disabled.
-AuthPriv. Both authentication and privacy are enabled.
The SNMP Configuration table shows the following columns:
•IP Address. The IP address of the SNMP manager.
•Subnet Mask. The subnet mask of the SNMP manager.
•Port. The trap port number of the SNMP manager.
•SNMP Version. The SNMP version (v1, v2c, or v3).
•Community. The trap community string of the SNMP manager.