Virtual Private Networking Using SSL Connections
281
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
If VPN tunnel clients are already connected, disconnect and then reconnect the clients on the
SSL VPN Connection Status screen (see View the SSL VPN Connection Status and SSL
VPN Log on page 292). Doing so allows the clients to receive new addresses and routes.
To change the specifications of an existing route and to delete an old route:
1. Add a new route to the Configured Client Routes table.
2. In the Configured Client Routes table, to the right of the route that is out-of-date, click the
Delete table button.
If an existing route is no longer needed, you can delete it.
Use Network Resource Objects to Simplify Policies
•Add New Network Resources
•Edit Network Resources to Specify Addresses
Network resources are groups of IP addresses, IP address ranges, and services. By defining
resource objects, you can more quickly create and configure network policies. You do not
need to redefine the same set of IP addresses or address ranges when you configure the
same access policies for multiple users.
Defining network resources is optional; smaller organizations can choose to create access
policies using individual IP addresses or IP networks rather than predefined network
resources. But for most organizations, NETGEAR recommends that you use network
resources. If your server or network configuration changes, you can perform an update
quickly by using network resources instead of individually updating all of the user and group
policies.

Add New Network Resources

The resource name and service are independent of the IP version. However, the resource
definition (see Edit Network Resources to Specify Addresses on page 282) is dependent on
the IP version because you can assign either an IPv4 or an IPv6 address or network.
To define a network resource:
1. Select VPN > SSL VPN > Resources. The Resources screen displays. (The following
figure shows some resources in the List of Resources table as an example.)