NETGEAR SRX5308-100NAS Figure 216. Remote Management screen for IPv6, Table 82. Remote Management screen settings for IPv4 and IPv6

Network and System Management
332
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Figure 216. Remote Management screen for IPv6
3. Enter the settings as explained in the following table:
Table 82. Remote Management screen settings for IPv4 and IPv6
Setting Description
Secure HTTP Management
Allow Secure HTTP
Management? To enable secure HTTP management, select the Yes radio button, which is the
default setting. To disable secure HTTP management, select the No radio button.
Note: The selected setting applies to all WAN interfaces.
Specify the addresses through which access is allowed by selecting one of the
following radio buttons:
• Everyone. There are no IP address restrictions.
• IP address range. Only users who use devices in the specified IP address range
can securely manage over an HTTP connection. In the From fields, type the start IP
address of the range; in the To fields, type the end IP address of the range.
• Only this PC. Only a user who uses the device with the specified IP address can
securely manage over an HTTP connection. Type the IP address in the fields.
Port Number Enter the port number through which access is allowed. The default
port number is 443.
Note: The URL through which you can securely manage over an
HTTP connection displays below the Port Number field.