N150 Wireless Router User Manual

Table 3. Router Statistics

Item

Description

 

Status

The link status of the port.

 

 

 

 

TxPkts

The number of packets transmitted on this port since reset.

 

 

 

 

RxPkts

The number of packets received on this port since reset.

 

 

 

 

Collisions

The number of collisions on this port since reset.

 

 

 

 

Tx B/s

The current transmission (outbound) bandwidth used on the WAN and LAN ports

 

 

(the average bytes per second transmitted since reset). Tx B/s is the total bytes

 

 

transmitted divided by the system up time (in seconds).

 

 

 

 

Rx B/s

The current reception (inbound) bandwidth used on the WAN and LAN ports (the

 

 

average bytes per second received since reset). Rx B/s is the total bytes received

 

 

divided by the system up time (in seconds).

 

 

 

 

Up Time

The time elapsed since this port acquired the link.

 

 

 

Poll Interval

The intervals at which the statistics are updated in this screen.

 

 

 

To change the polling frequency, enter a time in seconds in the Poll Interval field, and click Set Interval.

To stop the polling entirely, click Stop.

Viewing a List of Attached Devices

The Attached Devices screen contains a table of all IP devices that the router has discovered on the local network. Select Attached Devices under Maintenance in the main menu to view the table.

Figure 4.

For each device, the table shows the IP address, NetBIOS host name or device name (if available), and the Ethernet MAC address. To force the router to look for attached devices, click Refresh.

Note: If the Wireless Router is rebooted, the table data is lost until the router rediscovers the devices.

82 Chapter 6: Using Network Monitoring Tools

Page 82
Image 82
NETGEAR WNR1000v3h2 manual Viewing a List of Attached Devices, Rx B/s