32 | Chapter 2: Safeguarding Your Network
N150 Wireless Router User Manual
Figure 6.
4. Click the button in the Add WPS Client screen. The Connecting to New Wireless Client
screen displays.
Figure 7.
The green light on the WNR1000v3h2 router begins to blink in a regular pattern.
While the button light is blinking, you have 2 minutes to enable WPS on the device you
are trying to connect to the router.
5. In the wireless client, follow its specific networking instructions to enable WPS, to allow it to
connect to the router.
The WNR1000v3h2 router’s green light ceases blinking and remains on when one of
these conditions occurs:
• The router and the client establish a wireless connection.
• The 2-minute window period expires for establishing a WPS connection. If the
connection is not established, the SSID and security settings will not be changed.
Security PIN Entry
There are two ways to enable a wireless client to join a network using a PIN: using the
router’s security PIN or using the wireless client’s security PIN.

Using the Router’s Security PIN

1. Obtain your router’s security PIN from the rear panel of the router or from the Advanced
Wireless Settings screen.