RangeMax™ Wireless-N Gigabit Router with USB WNR3500L User Manual

3.On the QoS - Priority Rules screen, go to the Priority Category field, and select MAC Address from the drop-down list:

Figure 6-6

4.If the device to be prioritized appears in the MAC Device List, select it. The information from the MAC Device List is used to populate the policy name, MAC Address, and Device Name fields. If the device does not appear in the MAC Device List, click Refresh. If it still does not appear, you must complete these fields manually.

5.From the Priority drop-down list, select the priority that this device’s traffic should receive relative to other applications and traffic when accessing the Internet. The options are Low, Normal, High, and Highest.

6.Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.

7.Click Apply.

Editing or Deleting an Existing QoS Policy

To edit or delete an existing QoS policy:

1.From the main menu, under Advanced, select QoS Setup. The QoS Setup screen displays, as shown in Figure 6-2 on page 6-8.

2.Click Setup QoS Rule.

3.Select the radio button next to the QoS policy to be edited or deleted, and do one of the following:

Click Delete to remove the QoS policy.

Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to change the policy settings.

Fine-Tuning Your Network

6-12

v1.0, November 2009

Page 95
Image 95
NETGEAR WNR3500L-100NAS user manual Editing or Deleting an Existing QoS Policy, Click Setup QoS Rule