NETGEAR WNR3500L-100NAS user manual USB Storage Basic Settings, Fields and Buttons Description

RangeMax™ Wireless-N Gigabit Router with USB WNR3500L User Manual

Alternately, you can also type \\readyshare in the address field of your Web browser.

Note: If you logged in to the router before you connected your USB device, you might not see your USB device in the router screens until you log out and then log back in again.

The following table explains the fields and buttons in this screen:.

Table 7-1. USB Storage Basic Settings

Fields and Buttons		Description
Network Device Name		The default is \\readyshare. This is the name used to access the
		USB device connected to the router.
Available Network	Share Name	If only 1 device is connected, the default share name is
folders		USB_Storage. You can click the name shown or you can type it in
		the address field of your Web Browser. If Not Shared is shown, the
		default share has been deleted and no other share for the root
		folder exists. Click the Edit button to change this setting.
	Read/Write	Shows the permissions/access controls on the network folder: All –
	Access	no password (the default) allows all users to access the network
		folder. The user name (account name) for All – no password is
		guest. The password for admin is the same one that you use to
		log in to the router main menu. By default, it is password.
	Folder Name	Full path used by the network folder:
	Volume Name	Volume name from the storage device (either USB drive or HDD).
	Total/Free	Shows the current utilization of the storage device.
	Space
Edit button		Click the Edit button to edit the Available Network folder settings.
		See “Editing a Network Folder” on page 7-6.
Safely Remove USB Device button		Click to safely remove the USB device attached to your router. See
		“Unmounting a USB Drive” on page 7-10.

USB Storage 7-5

v1.0, November 2009