Reference Guide for the Model XM128 ISDN Digital Modem
Configuration 4-7
You will need to enter the phone numbers given to your ISDN line. The phone numbers will be
cleared whenever the switch type is changed.
1. Type ATDN0=n and [Enter].
Where n is the 7-digit phone number.
You should receive the following response:
OK
2. Type ATDN1=n [Enter].
Where n is the second 7 -digit phone number.
You should receive the following response:
OK
3. Type AT&W0Z0 and [Enter] to save the settings.
You should receive the following response:
OK
Setup for Europe and the United Kingdom
To configure your Model XM128 modem for Europe and the United Kingdom, follow these steps:
1. Type the command AT&ZOI= and the ISDN telephone number to assign the outgoing
telephone numbers.
For example, AT&ZO=5551111
2. Press [Enter].
3. Type the command AT&ZOA= and the outgoing telephone number for PHONE 1.
For example, AT&ZOA=5552222
4. Type the command AT&ZOB= and the outgoing telephone number for PHONE 2.
For example, AT&ZOB=5553333
5. Assign a protocol using the commands in Tabl e 4-5 to con figure the B ch an ne l proto col .