NETGEAR XM128 ISDN manual AT commands for setting protocols, AT commands for setting MSN, Ppp

Reference Guide for the Model XM128 ISDN Digital Modem

Table 4-5.	AT commands for setting protocols
Protocol		AT command
X.75		ATB00&O2
V.110 user rate - 38400 bps		ATB18&O2
V.120		ATB20&O2
PPP		ATB40&O2

For example, if the protocol you want is PPP, type the command ATB40&O2. For other X.75 or V.110 protocol options, refer to Appendix C, “AT Command Set Reference.”

6.Assign the appropriate MSN telephone numbers, using the AT commands in Table 4-6.

Table 4-6.	AT commands for setting MSN
Multiple subscriber number		AT command
X.75 telephone number		AT&ZI0=telephone number
V.110 telephone number		AT&ZI1=telephone number
V.120 telephone number		AT&ZI2=telephone number
PPP telephone number		AT&ZI3=telephone number
ISDN Data (Protocol autodetection)		AT&ZI4=telephone number
PHONE 1		AT&ZI6=telephone number
PHONE 2		AT&ZI7=telephone number

For example, to assign an MSN number for a V.120 call, type the command AT&ZI2=5553434.

7.Type the AT command AT&W0Z0 to store the information into NVRAM.

4-8 Configuration