NETGEAR XM128 ISDN manual Speed is greater than 19200 bps

Reference Guide for the Model XM128 ISDN Digital Modem

Table D-4.	Extended S-registers ATSn=x (continued)
Command	Bit	Decimal	Hexadecimal	Function and	Default or
				description	reference
S119=	2	0 *	0	Disables point-to-multipoint
(continued)				signaling DDI function.
		4	4	Enables point-to-multipoint
				signaling DDI function.
	3	0 *	0	Inbound call ignored when no
				MSN (EAZ) is matched.
		8	8	Inbound call accepted using
				default protocol when no MSN
				(EAZ) is matched.
	4	0 *	0	V.110 user rate = 19200 bps if DTE
				speed is greater than 19200 bps.
		16	10	V.110 user rate = 38400 bps if DTE
				speed is greater than 38400 bps.
	5	0 *	0	Enables normal MSN function.	&ZIn
		32	20	Treats the number assigned by
				&ZI=n... as subaddress, and
				matches with the called party
				subaddress for inbound call
				routing.
S120=				Accumulated charging unit (MSB
				byte) for B1 channel.
S121=				Accumulated charging unit (LSB
				byte) for B1 channel.
S122=				Accumulated charging unit (MSB
				byte) for B2 channel.
S123=				Accumulated charging unit (LSB
				byte) for B2 channel.
S124=				Empties IP packet interval for PPP.	+000
		0-255	0-FF	Units of 1 sec.
S125=	1-6		*0	Sub-persist time interval.	KSxn
	7	0	*0	S125b1-6 is in second unit.	KSSn
		128	80	S125b1-6 is in minute unit.	KSMn

D-18 Status Registers and Result Codes