NETGEAR XM128 ISDN manual Placing a Call for 1TR6

Reference Guide for the Model XM128 ISDN Digital Modem

Nn is the identifier of the numbering plan for the ATDx command:

•N0 for unknown (d efault if Nn is omitted)

•N1 for ISDN numbering plan (Rec. E.164)

•N3 for data numbering plan (Rec. X.121)

•N4 for telex numbering plan (Rec. F.69)

•N8 for national standard numbering plan

•N9 for private numbering plan

Zn specifies the type of the subaddress:

• Z0 for NSAP (Rec. X.213) with AFI=0x50, IA5 cha racters (default if Zn is omitted)

•Z2 for user specified, IA5 characters

The called-party number or an appropriate part of it is sent to the addressed entity. The called-party subaddress is transferred transparently by the ISDN network to the destination.

Use ATDL to redial the last dialed telephone number (and/or subaddress).

Placing a Call for 1TR6

The ATDx[Yn][Nn]destination_address command is used for dialing as follows:

x = I (ISDN data), A (the analog adapter 1), or B (the analog adapter 2)

Yn specifies the type of address:

•Y0 for unknown (d efault if Yn is omitted)

•Y1 for international number

•Y2 for national number

Nn is the identifier of numbering/addressing plan:

•N0 for unknown (d efault if Nn is omitted)

•N1 for ISDN numbering plan (Rec. E.164)

The destination address is the ISDN phone number of the called party. The last digit of this number is the EAZ. Use ATDL to redial the last dialed ISDN phone number.

7-12 Advanced ISDN