See also S-register | NETGEAR XM128 ISDN manual

Reference Guide for the Model XM128 ISDN Digital Modem

	Table D-4.	Extended S-registers ATSn=x (continued)

	Command	Bit	Decimal	Hexadecimal	Function and	Default or
	Command	Bit	Decimal	Hexadecimal	description	reference
					description	reference

	S20=				DTE speed (bps) auto-detected	+003
					from AT command

			0	0	230400 bps

			1	1	115200 bps

			3	3	57600 bps

			4	4	38400 bps

			5	5	19200 bps

			9	9	9600 bps

			11	B	4800 bps

			12	C	2400 bps

			13	D	1200 bps

			14	E	460800 bps

			15	F	921600 bps

	S21=				Bitmapped register

		1-2	0	0	Speaker is always off.	M0

			2	2	Speaker is on until carrier is	M1
					detected.

			4	4	Speaker is always on.	M2

		3	0	0	DSR is always on.	&S0

			8	8	According to CCITT. See also	&S1
					S-register S44.4 and S41.5.

		4	0	0	CD is always on.	&C0

			16	10	CD tracks presence of data carrier.	&C1
					See also S-register 38.3.

D-6	Status Registers and Result Codes

Image 120

NETGEAR XM128 ISDN manual See also S-register

Contents

NETGEAR, Inc USA Trademarks Statement of ConditionsEN 55 022 Declaration of Conformance Bestätigung des Herstellers/Importeurs Certificate of the Manufacturer/ImporterVCCI-2 Statement Customer Support Bulletin Board Service World Wide Web Contents Reference Guide for the Model XM128 Isdn Digital Modem Error Correction and Data Compression with Chapter Advanced Isdn Appendix a Technical Specifications Appendix E Connector Pin Assignments Figures Xii Tables Tables Xiii 10-1 Table F-1 Xvi Tables Preface Purpose Conventions Special Message FormatsUse of Enter, Type, and Press Manual contents Related PublicationOther Conventions Manuals DSU Features Chapter Introduction Reference Guide for the Model XM128 Isdn Digital Modem Front Panel Interface OptionsInterface options LED descriptions Label Color Activity DescriptionPWR DTR DSRRTS CTS Rear Panel Rear panel of the Model XM128 modem with S interface Power Rear panel componentsLabel Description ON/OFFPage Chapter Installation Package Contents Installing the Modem Model XM128 modem connections Verifying Hardware Installation Page Setup for Windows 95 and Windows NT Selecting the Appropriate Windows 95 Driver INF file Click on Close Chapter Configuration Configuring Your Isdn Line and NetworkConfiguring Your Modem Using a Terminal Program Understanding AT Commands Terminal programsOperating system Program Unix Quick Tips for Issuing AT Commands Supported AT command typesType of AT command Example Communication Speed Setup Using AT Commands to Verify Modem ResponseResult codes commands Command Description Switch Type Setup for North America Switches supported by the Model XM128 modem Spid Setup for North America Type ATSPIDO=n and Enter Setup for Europe and the United Kingdom Entering DNs AT commands for setting protocols AT commands for setting MSNProtocol AT command Multiple subscriber number AT command Internet and Remote Access PPP and Slip Chapter Async to Sync PPPMaking Async to Sync PPP and Slip calls Model XM128 modem modem responds Keeping a Line Connection During Idle Time Making a call using Multilink PPP Answering Async to Sync PPP callsMultilink PPP Dialing Pre-stored Phone Numbers Endpoint DiscriminatorS85 register values Value Description Call Bumping Dynamic Channel Allocation Page Commands for Outgoing Calls Dialing Out Using Isdn ModeChapter Isdn Overview Dialing Out Using Isdn Mode Optional Speech Bearer Service Manually Switching Communication ModesDialing Out for Analog Adapter Port Dialing commands Call placing commandsAT Command Dial string it maps to Placing the Call Commands for Incoming Calls Digital Data Determining the Packet Length Answering a Call Using MSN Commands for assigning Isdn numbers Data over Speech Channel Best-effort Call Answering Ambiguity Resolution Switch for Voice Calls Best-effort call answering bit commandsCommand Function Multi Auto-Answering of Data Calls Isdn protocol specifications Understanding Isdn Communication ProtocolsParameter 110 120 Configuration commands AT Command DescriptionIsdn Communications Answering a V.110 Call Selecting V.120 for European Isdn DSS1 Switch Selecting V.120 for German National Isdn 1TR6 Answering a V.120 Call Making a V.120 Call Dialing in V.120 Mode Identifying Your Line Provisioning Kbps Speeds Isdn Communications Europe Answering an X.75 CallMaking an X.75 Call Making a Bundled Call with Dialing Prestored Phone Numbers Bundle Connection with V.42bis Data Compression Page Chapter Advanced Isdn Call Control for DSS1 Control of Outgoing Service Indicator Register values and functionsS108+n= Function Outgoing low-layer compatibility commands Control of Isdn Phone Numbers and SubaddressesS108.n= Function Reference Guide for the Model XM128 Isdn Digital Modem Call Control for 1TR6 Old German Isdn Command Function Control of EAZ Endgeräteauswahlziffer Answering a Call Answering a Call for DSS1 Answering a Call for 1TR6 Best-effort Call Answering Ambiguity Resolution Switch for Voice Calls Multi-Auto-Answering of Data Calls Disable Inbound Call Connection Data Call Indication Point-to-Point Configuration Placing a CallPlacing a Call for DSS1 Placing a Call for 1TR6 User-To-User Information Page Chapter Analog Call Handling AT Commands for Analog Calls Frequently used AT commandsFrequently used AT commands European switches AT Command Description of command Making and Receiving Analog Calls Placing a Call from the Analog Adapter Accepting an Incoming Call Chapter Modem Upgrade Upgrading with Flash EpromDefinitions for the d modifier Modifier Definition Upgrade Instructions Kernel Mode Chapter Troubleshooting Power-on Self-testTest Sequence Test Description Loopback Tests Isdn Loopback test AT&T9Loopback with Self-test AT&T10 Diagnostic Command B1/B2 Loopback with Self-test Modem Reset Using The Embedded Protocol Analyzer Setting up the Embedded EPA Capturing the Protocol Data EPA Commands Commands for analyzing captured dataAnalyzing the Captured Data Atct Control key functions Key Function DescriptionPage Appendix a Technical Specifications General SpecificationsNetwork Protocols and Standards Compatibility Security Power Adapter Physical SpecificationsEnvironmental Specifications Data Compression Appendix B Security Functions Security Types and Levels Level 1 Security Level 2 SecurityTable B-1 Types of security Type 1 Security Type 2 Security Setting and Modifying Passwords Level 3 SecurityTable B-2 Levels of security Level Nonpassword Auto Callback Function Table B-3 Auto callback commandsAT*GC0 AT*GC1 Appendix C AT Command Set Reference Operation Mode of the DTE InterfaceSimplex Mode AT Command Descriptions Table C-1 Basic AT command setCommand Options Function and description CE0 CE1CH? CL? CP0 CP1Dtmf USA Model XM128 modem returns result code Description of ATI3 Output SPID0SPID1 SPID? Table C-2 ATI3 command output Table C-3 Extended AT& command setOutput parameter Output value description Result Codes Knn =phone number Table C-4 lists the extended AT* command set Table C-4 Extended AT* command set Viewing and Setting S-Registers Appendix D Status Registers and Result Codes Setting S-Registers Examples for Setting S-Registers Table D-2 Setting bit Table D-1 Binary conversion tableBit Binary Decimal Hexadecimal Value Operation Example Decimal Hexadecimal Binary Command Function and description Default Register DescriptionsTable D-3 Basic S-registers ATSn=x Table D-4 Extended S-registers ATSn=x See also S-register ATX1 ATX2 ATX3 ATX4 S24= Bitmapped register S35= Bitmapped register When Data/Voice is pressed Do not send low-layer compatibility Enables loopback 4 test DCA function is enabled Reference Guide for the Model XM128 Isdn Digital Modem Reference Guide for the Model XM128 Isdn Digital Modem Reference Guide for the Model XM128 Isdn Digital Modem Message handling systems MHS Reference Guide for the Model XM128 Isdn Digital Modem Speed is greater than 19200 bps Table D-5 ATXn command setting options ATXn Result Code Option Table Connect Result Code Chart Symbol Reference Table D-6. Result code chartSupported Result Code Field Descriptions Table D-7 Result code field descriptionsField name Possible values Connect Strings for Error Corrected Connections Table D-8 Connect stringsPage Appendix E Connector Pin Assignments RJ-45 Plug and Connector Pin Assignment RCV + XMT + RJ-11 Plug and Connector Table E-3. RJ-11 connector pin assignmentsPage Signal/pin description Signal direction Signal name Appendix F Serial Port InterfaceRS-232 Serial Interface Table F-1 Serial port interface Asynchronous Cable Connections Table F-2 Asynchronous flow control cable connectionTXD RXD RTS CTS DSR CD DCD DTR Appendix G Isdn Reference Isdn Overview Out-of-Band Signaling Basic Rate Interface Terminal Adapter or Digital Modem Isdn Basic Rate Interface Points Ordering Isdn Service Spid Setup Reference Guide for the Model XM128 Isdn Digital Modem Order Form for AT&T 5ESS Switch NI-1 Isdn Table G-1 Isdn line configuration Order Form for DMS-100 Switch NI-1 or Custom Isdn Table G-2 Isdn line configuration Table G-3 Isdn line configuration Order Form for Ewsd NI-1 Isdn Index Numerics Isdn Reference Guide for the Model XM128 Isdn Digital Modem Reference Guide for the Model XM128 Isdn Digital Modem