Nortel Networks 209321-A manual Main menu

Chapter 1 Management basics 19

Figure 1 Main menu

Business Policy Switch Main Menu

IP Configuration/Setup...

SNMP Configuration...

System Characteristics...

Switch Configuration...

Console/Comm Port Configuration...

Identify Unit Numbers...

Renumber Stack Units...

Display Hardware Units...

Spanning Tree Configuration...

TELNET Configuration...

Software Download...

Configuration File...

Display Event Log

Reset

Reset to Default Settings

Logout

Use arrow keys to highlight option, press <Return> or <Enter> to select option. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

5Select IP Configuration/Setup (or press i) to display the IP Configuration/Setup menu (Figure 2).

Note: The default management VLAN in the Business Policy Switch is VLAN 1. To manage the switch, make sure the network management station is on the management VLAN or is connected to the management VLAN through routers.

Figure 2 IP Configuration/Setup menu

	IP Configuration/Setup
	BootP Request Mode: [ BootP Disabled ]
	Configurable	In Use	Last Boot
	------------------	-----------------	-------------
In-Band Stack IP Address:	[xx.xx.xx.xxx]	xx.xx.xx.xxx	0.0.0.0
In-Band Switch IP Address:	[xx.xx.xx.xxx]		0.0.0.0
In-Band Subnet Mask:	[255.255.255.0]	255.255.255.0	0.0.0.0
Default Gateway:	0.0.0.0	0.0.0.0	0.0.0.0

Use space bar to display choices, press <Return> or <Enter> to select choice. Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.

Getting Started with the Business Policy Switch 2000 Management Software