![](/images/new-backgrounds/1205278/20527861x1.webp)
Chapter 3 Device Manager basics 31
Figure 4 Properties dialog box
2Type information and select check boxes.
3Click OK.
Table 1 describes items in the Properties dialog box.
Table 1 Properties dialog box items
Area | Item | Description |
|
|
|
Polling | Status Interval | Interval at which statistics and status information are gathered (default is |
|
| 300 seconds). |
|
|
|
| (If traps, Status | Interval at which statistics and status information are gathered when traps |
| Interval) | are enabled (default is 300 seconds). |
|
|
|
| Hotswap Detect | The interval at which Device Manager polls for module information |
| every | (default is 600 seconds). |
|
|
|
| Enable | Enables (checked) or disables (not checked) periodic polling of the device |
|
| for updated status. If polling is disabled, the switch or stack status is |
|
| updated only when you click Refresh in the chassis window. |
|
|
|
Getting Started with the Business Policy Switch 2000 Management Software