Nortel Networks IP Phone 2001 manual Enabling or disabling AutoScroll

Resetting the feature keys to the defaults 63

The key type is assigned and a check mark appears beside the item to indicate that type is active. You return to the Feature screen.

--End--

Enabling or disabling AutoScroll

If the AutoScroll feature is enabled, the IP Phone automatically directs you to the screen for the active feature. For example, if your second soft key is configured on screen two, and you get a call to that number, the feature screens scroll to page two. You can answer the call immediately without searching for the screen.

Prerequisites

You must be logged on.

Procedure Steps

Step Action

1From the main menu, open the Settings menu.

2From the Settings menu, open the Call menu.

3From the Call menu, open the Feature menu.

4From the Feature menu, select Assign.

5From the Assign menu, select AutoScroll.

6Press Ok.

The AutoScroll screen appears.

7Perform one of these steps.

•To enable AutoScroll, select Enable.

•To disable AutoScroll, select Disable.

8Press Ok.

A check mark appears beside the item to indicate your choice. You return to the Assign menu.

--End--

Resetting the feature keys to the defaults

Follow this procedure to reset the keys to the default settings.

Prerequisites

You must be logged on.

Carrier VoIP

Nortel IP Phone 2001 User Guide (CICM)

NN10300-005 09.01 Standard

4 July 2008

Copyright © 2008 Nortel Networks