Nortel Networks n0060597 To perform the BCM 4.0 and SRG 1.5 upgrade, BCM Upgrade Wizard welcome

Chapter 3 Upgrading to BCM 4.0 and SRG 1.5 21

To perform the BCM 4.0 and SRG 1.5 upgrade

1Insert the BCM 4.0 Upgrade CD marked Disk 1 into the CD-ROM drive of the management computer.

•If your CD-ROM drive is configured to run automatically, the welcome page appears.

•If your CD-ROM drive does not run automatically, run Startup.bat.

(On Windows, click Start, choose Run, enter <CD drive letter>:Startup.bat and then click OK.)

The welcome page of the Upgrade Wizard appears (see Figure 2). Read the information carefully so that you understand the upgrade process. This page explains how the upgrade process works.

Figure 2 BCM Upgrade Wizard welcome page

2Click I Accept to proceed with the upgrade.

The BCM Upgrade Checklist page appears (see Figure 3).

Upgrade Guide