38Chapter 5 Hard disk upgrade
Upgrade to BCM 4.0 through hard disk replacement
Use the following procedure to upgrade a BCM1000 system running BCM 2.x software to BCM 4.0 by replacing the system hard disk. The hard disk upgrade does not preserve customer data, including core data. You must reprogram all customer data after a successful upgrade.
To upgrade to BCM 4.0 through a hard disk replacement
1Perform a cold start of your BCM 2.x system.
2Power off your BCM 2.x system.
3Remove the current hard disk from your system (see the Installation and Maintenance Guide).
4Install the new BCM 4.0 hard disk into your system (see the Installation and Maintenance Guide).
5Initialize the hard disk (see the Installation and Maintenance Guide).
6Connect to your system with Element Manager.
Open a web browser and access the BCM 4.0 system web page. Download and install Element Manager on the management computer. Use the default username and password, nnadmin and PlsChgMe!, to access your BCM 4.0 system. The first time you connect to the system, you must change your password before continuing (after you enter the new password, click the Welcome link to activate the confirm password box). For more information on connecting to your system with Element Manager, see the BCM 4.0 Installation Checklist and Quick Start Guide.
7In Element Manager press the Cold Reset Telephony Services button (Administration > Utilities > Reset) to perform a cold start and remove the old data.
8Configure your system with Element Manager or the Startup Profile (see the Installation Checklist and Quick Start Guide).
9
N0060597
