Speech Processor

RTU-292 Operations Manual

Speaker Phone Response	5-15
Speaker Radio Command	5-7
Speaker Radio Response	5-15
Speaker Switch Assembly	6-7
SPEAKER TO MONITOR AUDIO	3-5
SPEAKER VOLUME CONTROL	3-2
SPEECH PROCESSOR	4-25
Speed Dial Command	5-8
Speed Dial Directory	3-17
Speed Dial Feature	3-17
SPEED DIAL FEATURE	3-17
SPEED DIAL RESET	3-18
Speed Dial Response	5-16
Squelch	10
SQUELCH BREAK ACCESS FEATURE	7-13
Standard DTMF Operational Commands	3-14
STANDARD OPTIONS	1-5
STATUS RETURNED FROM THE RTU-292	5-11

Table of Contents	3
TEL LINE BUTTONS	3-2
TEL VOX	3-3
TELEPHONE	1-6
TELEPHONE CALL ON HOLD	3-6
TELEPHONE CONNECTION	2-12
Telephone Interface	1-2
TELEPHONE INTERFACE CIRCUITS	4-20
TELEPHONE LINE INTERFACE	1-6
Telephone Line Switch Assembly	6-7
Telephone Receive Circuits	4-20
TELEPHONE RING VOLUME	2-8
Telephone Send Circuits	4-20
Telephone Send/Receive Levels	2-6
Tel-Line Phone Command	5-9
Tel-Line Phone Response	5-16
Tel-Line Radio Command	5-9
Tel-Line Radio Response	5-16
TERMINAL BLOCK	2-14, 3-4
TERMINATING A CALL:	3-12
TEST EQUIPMENT REQUIRED	6-1
The Caller Dials The RTU-292	3-11
The Caller Enters The Password (if enabled	3-11
The RTU-292 Adapts To The Phone Line	3-11
The RTU-292 Enters the COMMAND Mode	3-12

TRANSMITTER KEYING, FULL DUPLEX SYSTEM 3- 9

TRANSMITTER KEYING, HALF DUPLEX SYSTEM 3-

8
TX	10

UNPACKING	2-1
URC-200	7-15
USING THE CALL LOGGING FEATURE	7-14
USING THE HANDSET WITH THE RADIO	3-6
Using the Speed Dial Feature	3-17

V
Version Response	5-17
VMM-100 INSTALLATION AND CONFIGURATION7-
7
VMM-100 OPTION	7-6
VMR	10, 7-6
Voice Modulation Recognition	7-6
VOICE PROMPT OPTION	4-25, 7-2
Voice Prompt Option Installation	7-3
VOICE PROMPT SOFTWARE	4-26
VOICE PROMPTS	2-10, 3-10
Voice Prompts Enable	7-2
VOX	10, 4-23
VOX HANGTIME	2-7
VOX SENSITIVITY	2-7
VOX SENSITIVITY MEASUREMENT	6-5
VOX Sensitivity Test Set-Up	6-5
VOX Test Procedure	6-5

W
Waiting For Input (QUERY)	3-10

JPS Communications, Inc.

9-4

Nortel Networks RTU-292 operation manual Speech Processor