Nortel Networks RTU-292 operation manual Table of Contents

RTU-292 Operations Manual

Table of Contents

1 GENERAL INFORMATION		1-1
1.1	SCOPE	1-1
1.2	DESCRIPTION	1-1
1.2.1	GENERAL	1-1
1.3	ASSEMBLIES	1-2
1.3.1	MAIN BOARD	1-2
1.3.2 FRONT PANEL SWITCH ASSEMBLIES		1-3
1.3.3	OPTIONS INTERFACE BOARD	1-3
1.3.4	OPTIONS	1-5

2	INSTALLATION			2-1
	2.1	GENERAL		2-1
	2.2	UNPACKING AND INSPECTION		2-1
	2.3	RESHIPMENT OF EQUIPMENT		2-1
	2.4	INSTALLATION OVERVIEW		2-2
	2.5	INSTALLATION CONSIDERATIONS		2-2
	2.5.1		FCC PART 68 REGULATIONS	2-2
	2.6	POWER REQUIREMENTS		2-4
	2.7	INPUT POWER SELECTION		2-4
	2.7.1		LINE VOLTAGE SELECTION	2-4
	2.7.2		DC INPUT POWER SELECTION	2-4
	2.8	CONFIGURING THE RTU-292		2-5
	2.8.1		PROGRAMMING MODE SETUP PARAMETERS	2-5
	2.8.2		SETTING TELEPHONE SEND AND RECEIVE LEVELS	2-5
	2.8.3		VOX HANGTIME	2-7
	2.8.4		VOX SENSITIVITY	2-7
	2.8.5		BALANCED/UNBALANCED RADIO INTERFACE	2-7
	2.8.6		RX LINE INPUT IMPEDANCE	2-8
	2.8.7		DIAL MODE	2-8
	2.8.8		TELEPHONE RING VOLUME	2-8
	2.8.9		FULL/HALF DUPLEX RADIO	2-8
	2.8.10		SERIAL PORT BAUD RATE	2-9
	2.8.11		RADIO CONTROL MODE	2-9
	2.8.12		PASSWORD PROTECTION	2-10
	2.8.13		VOICE PROMPTS	2-10
	2.8.14		LOCAL PHONE / LOCAL PHONE RING-THROUGH	2-10
	2.8.15		TRANSMIT LEVEL SET-UP MODE	2-11
	2.8.16		MISCELLANEOUS JUMPERS	2-11
	2.9	INTERCONNECT INFORMATION		2-11
	2.9.1		TELEPHONE CONNECTION	2-12
	2.9.2		RADIO CONNECTION	2-12
	2.9.3		HANDSET CONNECTOR	2-13
	2.9.4		TERMINAL BLOCK	2-14
	2.9.5		RS-232 CONNECTION	2-15
	2.10 AUDIO LEVEL SETUP AND ADJUSTMENTS			2-15
	2.10.1		SETTING THE TRANSMIT LEVEL	2-15
	2.10.2		SETTING THE RECEIVE LEVEL	2-16
	2.11	INSTALLATION CHECKLIST		2-24
	2.12 OPTIONS INSTALLATION AND CONFIGURATION			2-24
3	OPERATION			3-1
			3	JPS Communications, Inc.