Nortel Networks RTU-292 Installation Checklist, Options Installation And Configuration

RTU-292 Operations Manual

2.11 INSTALLATION CHECKLIST

Table 2-20	Installation Checklist
Provide suitable Mounting and Cooling.	See Section 2.5.
Check AC Line voltage selection.	See Section 2.7.
DC Operation needed?	See Section 2.7.
Make Interconnections.	See Section 2.9 for External Interconnect Information.
Serial Remote Control needed?	Set Serial Remote Baud Rate with SW1-1 and 2. See RS-
	232 protocol in Section 5.
Set TX/RX Audio Levels if necessary.	See Table 2-1 and Section 2.10.
Set Telephone Line Levels if necessary.	See Table 2-1 and Section 2.8.
Are other Factory Default Settings correct for	See Table 2-1 and Table 3-2.
this system?	Make necessary changes as explained in sections 2.8, 2.10,
	and 3.7

2.12 OPTIONS INSTALLATION AND CONFIGURATION

See section 7 for installation instructions for all field-installable options. Section 7 also explains how to set-up any options that have configuration switches, jumpers, potentiometers, etc. For any options not covered in section 7, refer to custom notes supplied with the RTU-292 or the option, or contact JPS for information.

End of Section 2

JPS Communications, Inc. 2-24