Nortel Networks RTU-292 operation manual List of Tables

RTU-292 Operations Manual

List of Tables

TABLE 1-1	EQUIPMENT AND ACCESSORIES SUPPLIED	1-4
TABLE 1-2	OPTIONAL EQUIPMENT - NOT SUPPLIED	1-5
TABLE 1-3	RTU-292 SPECIFICATIONS	1-6
TABLE 2-1	RTU-292 FACTORY DEFAULT SETTINGS	2-3
TABLE 2-2	RECOMMENDED PHONE LINE SETTINGS	2-6
TABLE 2-3	TELEPHONE SEND/RECEIVE LEVELS	2-6
TABLE 2-4	VOX HANGTIME	2-7
TABLE 2-5	VOX SENSITIVITY	2-7
TABLE 2-6	DIAL MODE	2-8
TABLE 2-7	FULL/HALF DUPLEX	2-9
TABLE 2-8	BAUD RATE	2-9
TABLE 2-9	RADIO CONTROL MODE	2-9
TABLE 2-10	PASSWORD PROTECTION	2-10
TABLE 2-11	VOICE PROMPTS ENABLE	2-10
TABLE 2-12	LOCAL PHONE ENABLE	2-11
TABLE 2-13	LOCAL PHONE RINGTHROUGH	2-11
TABLE 2-14	TX LEVEL SET-UPMODE	2-11
TABLE 2-15	J1 - TEL LINE (RJ-11C)	2-12
TABLE 2-16	P1-RADIO(DB-9 MALE)	2-13
TABLE 2-17	J7 - HANDSET (RJ12C JACK)	2-13
TABLE 2-18	TERMINAL BLOCK (6 POSITION)	2-14
TABLE 2-19	P2 – RS-232 CONNECTOR (DB-9 MALE)	2-15
TABLE 2-20	INSTALLATION CHECKLIST	2-24
TABLE 3-1	STANDARD DTMF OPERATIONAL COMMANDS	3-14
TABLE 3-2	PROGRAMMING MODE DTMF COMMANDS	3-15
TABLE 5-1	COMMAND SUMMARY	5-2
TABLE 5-2	RESPONSE SUMMARY	5-11
TABLE 5-3	CALL PROGRESS RESPONSES	5-18
TABLE 5-4	RESPONSE ERROR CODES	5-18
TABLE 6-1	FAULT ANALYSIS	6-24
TABLE 7-1	RTU-292OPTIONS	7-1
TABLE 7-2	VOICE PROMPTS ENABLE	7-2
TABLE 7-3	LOCAL PHONE ENABLE	7-4
TABLE 7-4	LOCAL PHONE RINGTHROUGH	7-4
TABLE 7-5	LOCAL PHONE DTMF COMMANDS	7-5
TABLE 7-6	VMM-100 SPECIFICATIONS	7-9
TABLE 7-7	VMM-100 I/O CONNECTOR INFORMATION (P9)	7-10
TABLE 7-8	VMM-100 SWITCH FUNCTIONS	7-10
TABLE 7-9	DTMF RADIO CONTROL COMMANDS	7-16

JPS Communications, Inc. 8