Nortel Networks RTU-292 Operations Manual, Dial Response, 5.4.5, Disconnect Response

RTU-292 Operations Manual

5.4.4Dial Response

%DIAL <OPERLPnumber string> Exx <CR>

Type: Synchronous.

Response To: Dial Command.

This response indicates that the given number was dialed.

Valid digits for the number string are '0'-'9', the characters * # and ','. The comma character is used to produce a 2 second pause while dialing. No spaces are allowed in the number string.

Examples:

%DIAL 5551234 E0 <CR> ; Status returned indicating that the number 5551234 was dialed.

%DIAL OPER E0 <CR> ; Status returned indicating that the call has been placed to the operator (front panel).

5.4.5	Disconnect Response
%DISC Exx <CR>
Type:	Multi.
Response To: Disconnect Command, Telephone Command (*#) Disconnect, System Initiated
Disconnect
This response indicates that the PSTN, Operator, or Local Phone has been disconnected
Examples:
%DISC E0 <CR>		; Status returned indicating that the PSTN was disconnected.

5.4.6DTMF Response

%DTMF <number string> Exx <CR>

Type: Synchronous.

Response To: DTMF Command.

This response indicates that DTMF was generated for the given number.

Valid digits for the number string are '0'-'9', the characters * # and ','. The comma character is used to produce a 2 second pause. No spaces are allowed in the number string.

Examples:

%DTMF 1234 E0 <CR> ; Status returned indicating that DTMF was generated for the number 1234.

%DTMF 1234 E6 <CR> ; Error status indicating that the unit could not generate DTMF at this time.

Most likely ; due to the fact the unit is still on-hook.

5-13 JPS Communications, Inc.