Nortel Networks RTU-292 operation manual Tel-Line Phone Command, Tel-Line Radio Command

RTU-292 Operations Manual

5.3.13 Tel-Line Phone Command

TEL_LINE_PH <ONOFF?> <CR>

This command is to enable, disable or query the current status of Tel-Line Phone. Note that enabling Tel-Line Phone will put the PSTN in an Off-Hook status. Disabling Tel-Line Phone will only put the PSTN back on hook if Tel-Line Radio is also disabled. To quickly disconnect the PSTN use the DISC command.

Expected Response: Tel-Line Phone Response.

Examples:
TEL_LINE_PH ON <CR>	; Command to enable the Tel-Line Phone path.

%TEL_LINE_PH	ON E0 <CR> ; Status returned showing that Tel-Line Phone is enabled.
TEL_LINE_PH ? <CR>		; Command requesting the status Tel-Line Phone.
%TEL_LINE_PH	OFF E0 <CR> ; Status returned showing that Tel-Line Phone is disabled.

5.3.14 Tel-Line Radio Command

TEL_LINE_RAD <ONOFF?> <CR>

This command is to enable, disable or query the current status of Tel-Line Radio. Note that enabling Tel-Line Radio will put the PSTN in an Off-Hook status and cause the DSP telephone hybrid to adapt. Disabling Tel-Line Radio will only put the PSTN back on hook if Tel-Line Phone is also disabled. To quickly disconnect the PSTN use the DISC command.

Expected Response: Tel-Line Radio Response.

Examples:
TEL_LINE_RAD ON <CR>	; Command to enable the Tel-Line Radio path.

%TEL_LINE_RAD	ON E0 <CR> ; Status returned showing that Tel-Line Radio is enabled.
TEL_LINE_RAD ? <CR>		; Command requesting the status Tel-Line Radio.
%TEL_LINE_RAD	OFF E0 <CR> ; Status returned showing that Tel-Line Radio is disabled.

5-9 JPS Communications, Inc.