Oki 5300 Plus manual 4SYSTEM Data PRG

To program your Fax ID:

1Press the Select Function key.

2Press the 9/User Program One Touch key. The display shows 1:FUNC. PROGRAMMING.

3On the numeric keypad, press 4. The display shows

4:SYSTEM DATA PRG.

4Press the Yes ◀ key. The display shows NO=<TSI/ CSI>, ID=<SENDER ID>.

5After the display clears, enter the full telephone number of your OKIFAX using the numeric keypad.

Note: use the Hyphen key to enter a “+” character for international numbers, and use the Space One Touch key to enter spaces.

6Press the Start key to save your entry.

7Enter your Sender ID. This is a descriptive title up to 32 characters long. Refer to the instructions below.

To Do This	Use
Enter numbers	Numeric keypad (press once)
Enter spaces	14/Space One Touch key
Enter hyphens	Hyphen key
Enter alphabet characters	Locate the character you want on the
	numeric keypad. Press that key repeatedly
	until the character appears on the display
Enter a unique character	Press the 0/Unique key repeatedly until
	the character you want appears on the
	display. The following characters are
	available: ! # & ‘ ( ) * + , - . / : ; = ? · ä ß
	ñ ö ü Æ Å Ø æ å ø
Enter two successive	Press the No ▶ key to move to the
letters/numbers using	next character
the same key
Move the cursor to	Yes ◀ and No ▶ keys
make corrections

8Press the Start key to save your entry. The display shows NO=<CALL BACK NO.>.

9After the display clears, use the numeric keypad to enter the telephone number for call back messages. Enter up to 20 characters.

Tip: Use the 14/Space One Touch key to enter spaces.

10Press the Start key to save your entry.

11Press the Select Function key to finish.

24Installation