STORE TO HARD DISK
Store to Hard Disk (job spooling) allows print jobs to be prepared and stored on the hard disk for printing on demand. This is good for forms, generic memos, letterhead stationery, etc.
NOTE
•The internal hard disk must be installed in the printer and enabled.
•If the hard disk memory is insufficient for the spooled data, DISK FULL is displayed and only one copy printed.
•If the software application being used has a collate print option, this must be turned OFF for Store to Hard Disk to operate correctly.
•Store to Hard Disk may not be available in some software applications.
1.Open the file in your application and select File Print.
2.In the Print dialog box, click the appropriate OKI C9x00 driver on the General tab, then click the Job Options tab.
3.Enter the number of required copies and, if required, check the Collate box, then select Store to HDD.
PostScript Driver | PCL Driver |
NOTE
If you’ve already stored a document on the hard disk drive and want to store another one, click the PIN button and enter a new Job Name.
